BVFBQ - 1000 - MARINE ENAMEL, WHITE TOPCOAT
- MSDS: BVFBQ
- Manufacturer: PRO LINE PAINT CO
- Product Name: 1000 - MARINE ENAMEL, WHITE TOPCOAT
- National Stock Number: 8010-00N051231
Product Identification
Product ID:1000 - MARINE ENAMEL, WHITE TOPCOAT
MSDS Date:08/20/1992
FSC:8010
NIIN:00N051231
MSDS Number: BVFBQ
Responsible Party
SAN DIEGO, CA 92113-3697
US
Emergency Phone: 619-728-3192
Info Phone: 619-231-2313
Preparer: E. SOETERIK
Cage: 9D157
Contractor
Telephone: 619-231-2313; 619-232-8968
Cage: 9D157
Ingredients
ALKYD RESIN (CONTAINING INGS 2 - 6)
Fraction By Weight: 39%
OSHA PEL N/K
ACGIH TLV: N/K
VM&P NAPHTHA; (MINERAL SPIRITS) (CONTAINING INGS 3 & 4)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 37%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
133-20-7)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 2.1%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM;150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 0.9%
OSHA PEL 200 PPM
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ORGANOPHILIC CLAY
Fraction By Weight: 12%
OSHA PEL N/K
ACGIH TLV: N/K
PHTHALIMIDE, N-((TRICHLOROMETHYL)THIO)-;
CAS: 133-07-3
RTECS: TI5685000
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 27%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
CHLORINATED PARAFFIN; (CHLOROWAX 30)
CAS: 61788-76-9
Fraction By Weight: 4%
OSHA PEL N/K
ACGIH TLV: N/K
ALKYD RESIN (CONTAINING INGS 10 - 12)
Fraction By Weight: 18.86%
OSHA PEL N/K
ACGIH TLV: N/K
STODDARD SOLVENT; (R-66 MINERAL SPIRITS 6.8%)
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 8%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
XYLENE (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 2.9%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM;150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ALKYL BENZENES, C-10 TO C-12; (ALIPHATIC HIGH FLASH
CAS: 68515-25-3
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: 500 PPM (MFR)
ZIRCONIUM COMPOUNDS; (ZIRCONIUM CARBOXYLATE) (CONTAINING
OSHA PEL N/K
ACGIH TLV: 5 MG/M3 (MFR)
VM&P NAPHTHA; (MINERAL SPIRITS 60%)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 0.15%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
VOLATILE ORGANIC COMPOUNDS
RTECS: 9999999VO
Fraction By Weight: 402% G/L
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 6.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:INHAL OF HIGH VAP CONCS MAY HAVE
RSLTS RANGING FROM DIZZ & HDCH TO UNCON. SKIN/EYES:BURNING
SENSATION FROM VAP/LIQ. DERM, SENSIT OF SKIN. EYE CONT CAN CAUSE
SEV IRRIT, REDNESS, TEARING & BLURRED VISION. INGEST:TOX IF
SWALLOWED. CAN CAUSE BURNING SENSATION, VOMIT, DIARR, DROW.
ACUTE:NAUS, DIZZ, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:HDCH & CONVLS. CHRONIC:CONTINUOUS RPTD
&/OR PRLNG IRRIT CAN LEAD TO INFECTIONS. RPTS HAVE SHOWN THAT ASSOC
RPTD & PRLNG OCCUP OVEREXP TO SOLVS CAN CAUSE PERM BRAIN & NERV SYS
DMG. INTENTIONAL MISUSE BY DELIB CONCENTRATING & INHALING CONTENTS
MAY BE HARMFUL/FATAL. NOTE:TOLUENE APPEAR ON NAVY LIST OF (SUPP
DATA)
Medical Cond Aggravated by Exposure:ASTHMA & SKIN ALLERGIES. CAN CAUSE
DISCOMFORT TO PEOPLE W/THESE ALLERGIES, BUT NORMALLY IT IS NOT A
PROBLEM.
First Aid
First Aid:EYE:FLUSH IMMED W/FRESH WATER BY EYE WASH APPARATUS/BY HAND
FOR AT LST 15 MINS. SEEK MED ATTN. SKIN:WASH IMMED W/WATER. THEN
WASH W/SOAP & WATER, RINSE IMMED. SEEK MED ATTN. INHAL:MOVE PERS TO
FRESH A IR; ARTF RESP IF NEC. SEEK MED ATTN. INGEST:SEEK MED ATTN.
RECS TO MD:IN ACUTE CASES SEEK MED ATTN IMMED. FOR WORKERS WHO MAY
BE EXPOS REGULARLY, PROVIDE DETAILED PERIODIC EXAMINATIONS.
Fire Fighting
Flash Point:101F,38C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:WATER FOG, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
BLANKET FLAME W/ONE OF ABOVE. VAPS OF COMBUST MAY BE IRRIT TO RESP
TRACT. MAY CAUSE BRTHG DFCLTIES.(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS &
OPEN FLAMES.
Accidental Release
Spill Release Procedures:REMOVE ALL TYPES OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEAN-UP PERSON W/NIOSH/MSHA
APPROVED 8540 3M CORP RESPIRATOR & GOGGLES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:TRAIN EMPLOYEES ON ALL SPECIAL HNDLG
PROCS IN THIS SECTION BEFORE THEY WORK W/THIS PROD. STORE IN COOL,
WELL VENTILATED AREA W/SPRINKLER SYSTEM.
Other Precautions:PROTECT AGAINST PHYSICAL DMG TO CNTNRS & SPILLAGE.
KEEP AWAY FROM HEAT. POST NO SMOKING SIGNS. ODOR IS NOT ADEQ
WARNING OF INTOX. USE ONLY W/ADEQ VENT. FOLLOW APPLIC DIRECTIONS &
USE CARE WHEN HNDLG C HEM & PETRO PRODUCTS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST/MIST RESP (HIGH
EFFICIENCY CARTRIDGES ADVISED) IF SPRAYING/SANDING. USE NIOSH/MSHA
APPROVED ORGANIC VAPOR CARTRIDGE RESP IF TLV FOR SOLV COMPONENTS
MAY BE EXCEEDED E.G. (8 540 3M CORP RESP). WHEN USING IN(SUPDAT)
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:USE PROT CLOTHES. PROVIDE EMER SHOWER &
EYEWASH WHICH MEET ANSI DESIGN CRITERIA @ STATIONARY PAINT
APPLICATION FACILITY.
Work Hygienic Practices:CHANGE CONTAMINATED CLOTHING IMMEDIATELY.
Supplemental Safety and Health
FIRE FIGHT PROC:PVNT HUMAN EXPOS TO FIRE, SMOKE, FUMES, ETC. EFTS OF
OVEREXP:OCCUP CHEM REPRO HAZS. SEEK CONSULTATION FROM APPROP HLTH
PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG & EXPO S
INFO . RESP PROT:CONFINED AREA,USE AIR-FED HOOD.
Chemical Properties
Boiling Pt:B.P. Text:301F,149C
Vapor Pres:5 @ 20C
Vapor Density:4.8
Spec Gravity:1.29
Evaporation Rate & Reference:0.22 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE OR COLORED LIQUID W/STRONG SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXYGEN & STRONG OXIDANTS, WILL DISSOLVE SOME PLASTICS & RUBBER.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAMES. DO NOT ALLOW
VAPORS TO ACCUMULATE.
Hazardous Decomposition Products:FLAMM FUMES MAY ACCUM IN CONFINED AREA
& SPKS/OPEN FLAMES MAY IGNITE IT. MAY LIBERATE CARBON
MONOXIDE/CARBON DIOXIDE.
Conditions to Avoid Polymerization:EXTREME HEAT.
Disposal
Waste Disposal Methods:USE METAL CONTAINER MARKED "DO NOT REUSE". PUT
MATERIAL IN THIS CONTAINER. USE VERMICULITE OR OTHER INERT
ABSORBENT. KEEP AWAY FROM SEWER. DISPOSE OF ALL WASTES I/A/W
FEDERAL, STATE & LOCAL REGULATION S.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.